Waterproof UTV Seat Covers for Polaris Ranger Models - Heavy Duty Fit

INSTRUCTIONS FOR SEAT COVERS
NOTE: IT IS EASIEST TO INSTALL THE NEW SEA COVER USING TWO PEOPLE. ONE PERSONTO PULL AND HOLD
THE COVER WHILE THE OTHER STAPLES
Tools:
1.Small flat blade screwdriver/Needle Nose Pliers/Utility Knife
2.Power or manual Stapler
3.1/4" to 3/16"Staples
Removal of old seat cover:
Most seat covers are stapled to the plastic seat base. You will need a small flat blade screwdriver and a pair of needle nose pliers. Pry each staple up and remove with the needle nose pliers. Remove all the old staples and original seat cover. lf your seat foam is wet, let it sit out in the sun for a day or two to dry Clean the seat base in preparation of installing the new cover.
Installation of new seat cover:
1.Set the new seat cover in the sun or other warm place for 15-30 minutes to make it more flexible.Position the cover over the seat and orientate it to the proper position. Starting at the front of the seat,center and align the cover then wrap the cover around the seat and put 3-4 staples to hold it in place.
2.Now center the back of the seat and put 3-4 staples in the back. Next pull the sides around tight and put 3-4 staples in each side
3. You should now have a good idea of how it should fit on the seat. Try to get the most difficult areas first by pulling the cover tight and stapling it in place Go back and forth trying to work outany wrinkles. You will probably have to remove staples in same areas and redo them to get the cover fitting perfectly.maybe you need two people and a lot of patience.
4.Take your time working all the way around the cover until it fits nicely and you have it stapled about all the way around. Use extra staples in the corners where the fabric folds over itself.
【Compatibility】SMOTRCC ranger seat cover is compatible wiht Polaris Ranger 400 EV Midsize 2010-2014 / Polaris Ranger 500 Midsize 2011-2013 / Polaris Ranger 570 Midsize 2014-2019 / Polaris Ranger 800 Miside 2012-2014.
【Premium Material】The ranger seat is made by high grade stretch polyurethane leather with waterproof pu coating, upgraded thickness design,having features waterproof, dirtproof and great weather and abrasion protection.
【Perfect fit】Forget the seat covers that fall off easily, this seat cover meets original equipment (OE) standards, ensuring that the fits as comfortably as the original seat cover.
【Easy Installation】Ranger seat covers are stapler-mounted, you need an electric or manual stapler with 1/4 "to 3/16" staples, just a few minutes of installation and you'll have a comfortable and comfortable seat cover!
【Easy to Clean】The UTV seat cover set is made of high grade stretch polyurethane leather and can be used in all weather conditions. You can rinse with water or wipe with a wet towel.